Part IIA guide
PDF versionTable of contents
- Part II aims & objectives
- Structure & balance of work
- Modules
- Engineering areas
- Coursework & labs overview
- Part II exam period, location & timetable
- Accreditation of the MEng
- Allowances
- Part IIA coursework contacts and hand-in locations
- Distinguishing between cooperation & cheating
- Inclusive teaching
This document contains important information for Part IIA students. Where appropriate, supplementary information will be issued throughout the year.
You are reminded of the progression requirements and industrial experience requirements for the Tripos and of opportunities for becoming a student or affiliate member of one or more of the Institutions that accredit the Tripos.
Part II aims & objectives
Teaching aims
The aims of Part II of the Engineering Tripos are to encourage and enable students to:
- specialise in considerable depth in a chosen area of engineering;
- acquire up-to-date knowledge and understanding of theory and practice in a chosen area of engineering, in an atmosphere informed by research;
- continue to develop skills in modelling, analysis and problem solving;
- develop creativity, synthesis and design skills, and the ability to create engineering design solutions;
- design and evaluate experiments and computer software;
- continue to develop communication, teamwork, management and leadership skills;
- develop an awareness of the international role of the engineer;
- develop the facility for independent learning, open-mindedness, and the spirit of critical enquiry;
- develop the ability to tackle unforeseen technical and management demands and to apply new technologies in novel situations with confidence and competence;
- develop their full potential as innovators and future leaders in industry, the professions, public service, academic teaching and research.
General objectives
At the end of Part II undergraduates should:
- by means of lecture courses, associated course requirements, examples papers and appropriate reading have gained an understanding in depth of engineering science in specialised areas;
- have progressed further with all but the first of the general objectives for Part I of the Engineering Tripos;
- by means of team projects have developed cooperative, management and communication skills as well as practical professional knowledge;
- by means of a major project in either design or research have developed creativity, innovation and a capacity for independent learning and enquiry.
The progress of each undergraduate is measured by Tripos examinations and by assessed coursework. Tripos classes and details of marks are notified to undergraduates through CamSIS or by their Colleges, and progress with coursework is communicated by staff marking individual coursework activities.
Detailed objectives for each element of the course are given with the syllabuses for each series of lectures and with the instruction sheets for coursework.
Structure & balance of work
In Part IIA, you will begin to specialise in your chosen branch of engineering. There is flexibility in the degree of specialisation, although you will devote at least 60% of your time to your chosen branch of the profession. If you wish, you can continue to maintain a wider breadth of study by taking topics outside of your engineering area, including management and foreign languages.
In outline, the course comprises lectured modules and coursework, as specified in the Faculty Board notice. Each single module (the majority) has 16 lectures in either Michaelmas or Lent Term. There are a few double modules, which have 16 lectures in both terms. You take 10 modules (double modules counting as two single modules), 5 in each of Michaelmas and Lent. All modules have associated coursework, which is generally a laboratory experiment or (for modules in group E) a report. You should complete all the coursework for your 10 modules, but only your best 8 marks will be used for examination credit. You will write two Full Technical Reports based on module experiments. In addition, you will have supervisions for each module, arranged by the Module Leader. Some Group E modules have examples classes for the whole group together in place of conventional supervisions. During either Michaelmas or Lent you will undertake a group project in the form of an Extension Activity. The examinations are held at the start of the Easter Term. During the remainder of that term you work on two projects.
Modules
Overview
Most Part IIA modules (preceded by numeral 3) have 16 lectures and 3 hours of small-group supervisions completed in one term (either Michaelmas or Lent). These are examined by an written paper of 1.5 hour duration held early in the Easter term. However, some group A courses are double modules that run throughout both the Michaelmas and Lent terms and are each examined by a 3 hour written paper.
The Faculty Board publishes in May a list of the Part IIA modules that will run the following academic year .
Part II modules are grouped according to the CUED Subject Group offering them and are subdivided into sets (spread evenly across Michaelmas and Lent terms). The lectures for modules in each set are examined at the same time, and you are not permitted to choose more than one module from any one set (even if the lectures do not clash). You should discuss module choices with your Director of Studies.
Rules
Please refer to the guidance on Engineering Areas for advice on module choices. The main rules are that:
- you must choose ten modules from Groups A-G, M and S, and Group I (if offered);
- five must be in the Michaelmas term and five must be in the Lent term;
- if you wish to qualify in an engineering area, you must follow the specific rules on module choices for that area;
- no student may include more than two modules from the combination of Groups I and S in his/her total.*
- students may take up to two management modules. Management includes all 3EX modules, and related shared modules offered in some years by other subject groups (e.g. 4D16 Construction & Management).
There are also conditions specific to professional institutions accreditation.
*Group S are Part IIB modules (thus preceded by numeral 4) available to Part IIA students. There are no supervisions or separate coursework for fourth-year modules. Group I modules are modules imported from courses within Engineering or from other departments
Selection on COMET
You can update your provisional module selection at the start of each of the Michaelmas and Lent terms, and will be contacted by email with a reminder to log on to COMET to confirm or change your provisional choices.
You should attend the first lecture of any module of interest to gain an overview of its content and structure.
Your selection must be finalised each term by midnight on the Wednesday of week one. Shortly after each deadline, you will confirm your selection for that term as a binding exam entry that may not subsequently be changed or discounted.
COMET will check that your selection is valid and will notify you if your module choices do not fit into your chosen engineering area. If this is the case, you must revise your selection.
Administration
Each course has a module leader and a lab leader (sometimes, but not always, the same person). Any queries regarding lab experiments, lab handouts or coursework should be addressed directly to the chief technician or the lab leader. Any queries regarding lecture notes, examples papers and supervisions should be addressed directly to the module leader.
Also see:
- contact information for Part IIA modules and labs,
- locations of Group centres for lab sign-ups, handing in coursework, and storage of spare handouts/examples papers.
Supervision
Module leaders will appoint supervisors and notify you of their details soon after COMET closes. The number of supervisions to be given for each Part IIA module is usually four, comprising three (one hour) supervisions in the term of the module plus a later ‘revision’ supervision. Any additional supervision must be authorised in advance by your Director of Studies.
Any major problems with regard to supervisions should be brought to the immediate attention of your DoS, even after the first supervision. You may also use the dedicated, anonymous fast feedback facility for Part IIA supervisions.
Engineering areas
Engineering areas
If you wish to qualify in a specific engineering area, at least six modules from your total of ten must fall within one of the engineering areas defined by the Faculty Board.
The titles of the engineering area for which you are qualified will appear on each of your Part IIA and IIB transcripts. In some cases, you may be qualified for more than one engineering area, in which case all will appear on your transcript. It is not essential that your engineering area at Part IIB will be the same as that at Part IIA.
New for 2015-16: If you do not wish to choose six modules from an engineering area you may instead qualify in Engineering (i.e. General Engineering). Your choice of modules is less restricted, but you must still follow other requirements about module choices (e.g. sets).
Engineering area |
Coordinator |
|---|---|
For advice on engineering areas and module choices go first to your Director of Studies. The staff listed above will be happy to provide expert advice on their Engineering Areas.
General queries about Manufacturing Engineering should be sent to the MET Course Administrator; detailed queries about academic course content may be sent to Dr James Moultrie or Dr Tim Minshall.
Extension activities
You must also complete a Part IIA Extension Activity, and in most (but not all) cases your choice of this is not restricted. For further details see Part IIA Extension Activities.
Coursework & labs overview
Introduction
Most Part IIA modules run completely in either the Michaelmas or the Lent term and have 16 lectures and one associated lab experiment or written assignment to be completed in the same term. However, two of the Group A courses are double modules of 32 lectures that run throughout Michaelmas and Lent terms with two associated lab experiments. Your best 8 marks for coursework associated with any of your modules from Groups A-G and M can be counted towards your final Part IIA coursework credit total.
Modules in Groups I and S will be assessed by examination (and in some cases coursework as well) but all marks achieved on these modules will contribute to your overall Part IIA examination mark and will not count as part of your Part IIA coursework credit.
Part II coursework is assessed not only on technical content but also on report-writing and exposition skills (see the report writing guide).
Third year coursework is assessed for positive credit, rather than marks being capped at a qualifying level as in Part I. See the Faculty Board notice on coursework and exam credit for a breakdown of the total marks available for each activity.
In addition to the activities outlined here, students undertake two projects in the Easter term.
Extension Activity (ExA)
Most ExAs are designed to introduce you to various measurement and test procedures in your chosen professional area, but non technical options also exist, such as the Language ExA. The commitment is 16 hours total, including up to 12 in the laboratory or the field. The form of the report will vary from area to area. Timetable arrangements also vary, but in all cases they only run on certain specified dates.
You should sign up for your ExA first and then fit your regular module labs around it. Sign-up may be on-line or on a signing sheet.
The deadline for booking your ExA (for either Michaelmas or Lent) is Wednesday of week 1 in Michaelmas Term
Module-related coursework
All Part IIA modules in Groups A-G and M have associated with them at least one lab experiment or written assignment. Experiments typically involve 2 hours in the lab, working individually or in pairs, with a 2-3 hour individual write-up (although some modules may have special arrangements).
Modules in Groups I and S do not have separately assessed coursework – any coursework you do for an I or S module forms an integral part of the examination credit for that module and does not count towards your coursework credit.
You are strongly encouraged to complete coursework for all your modules from Groups A-G and M. If you do complete more than eight eligible pieces of coursework, your best eight marks will be carried forward towards your Part IIA coursework credit total. However, with the exception of double modules (3A1 and 3A3), only one piece of coursework per module may be counted towards the coursework total.
The management modules (in Group E) each have a single piece of coursework instead of a lab experiment. Details of their scope and arrangements for submission will be announced in lectures.
Module coursework reports
Students are required to provide their own lab books and paper for recording and/or plotting data during the lab sessions. It is best practice to plot graphs while you are still at the lab bench so that you can see if you have enough points in the right places to define the required curve – or if you have any readings which look suspect and should be repeated. We are especially insistent that all original readings are retained and submitted in your report.
The report, which may be word-processed or hand-written (legibly), should take no more than three hours. Excluding any graphs, each report should be no more than 5 pages as a hand-written document, or no more than 3 pages word-processed. Exceeding page limits may lead to loss of marks. All reports (or essays for Group E modules) must be submitted with a coversheet attached (also available from the racks outside the Teaching Office). Enter the hours spent on the report on the coversheet – this is for feedback purposes only, and will not be considered in marking.
Markers will be looking for a clear record of the practical work you have carried out, together with appropriate discussion. While legibility and clarity are vital, hand-drawn diagrams and graphs and long-hand text and equations are perfectly acceptable. Readings taken jointly in the laboratory may of course be shared with your lab partner, but reports must be written individually. See the guidance on cooperation and cheating.
Full technical reports (FTRs)
You must submit a total of two full technical reports, at least one of which must be in the Michaelmas term. These reports are based on an expansion of a module experiment, and each should involve a further 10 hours work. Some modules may substitute a written exercise or essay for the full technical report. Lab handouts explicitly state whether they are suitable as the basis of an FTR.
There are no FTRs associated with modules in Groups E, I, M or S.
Having checked that a lab is suitable, you should complete the experimental work early in the term and submit the lab report no later than week 6. This gives time for it to be marked and returned to you before you write your FTR. FTRs rarely require you to carry out additional experimental work, but they do usually require a significantly more extensive analysis of the experimental findings, and/or further reading and discussion of the technical literature. The report itself should be typed or word processed to a professional standard – FTRs are assessed for quality of presentation as well as technical content.
The object of the exercise is to enhance your technical communication skills – your ability to explain to others what you have done and to provide appropriate concise discussion. The main body of the text must be your own work. The marked module lab report should be included as an appendix to the completed FTR.
Your FTR should not exceed 10 pages (including title page, diagrams, appendices etc., but excluding the original lab report if included as an appendix) and be written in a sensible font size (minimum 11 pt) with appropriate line spacing. Blank FTR coversheets should be downloaded or collected from the racks outside the Teaching Office. FTRs must be handed in directly to the group centre for the relevant module, to the designated person or a secure mailbox. Do not leave your report in an open unattended tray, and do keep a copy.
The Michaelmas term FTR must be submitted by 4pm on Friday 4 December, and will be marked over the Christmas vacation and available for collection at the start of the Lent term. The Lent term FTR must be submitted by 4pm on Friday 11 March and will be marked over the Easter vacation. Collection is from the group centre where you handed it in.
Guidance on report writing
See the report writing guide for generic guidance. The lab handouts will outline the technical aspects of the problem you should address when writing your lab report or FTR, and may provide guidance on the required content and structure of the report: specific instructions given in the lab handouts always take precedence.
Signing up for labs
Most labs have a booking system but a few have a restricted rota or experiments that are available only for a limited period. Any special arrangements for module practical work will usually be described during the first module lecture. Sign-up may be on-line or sheets located in group centres. Some modules offer a choice of lab, but you may only sign up for one lab associated with the module. You may sign up only for labs associated with modules you are taking. Please remember to remove your name from lab signing sheets if you change your module choice.
Study the booking sheets for all your modules before signing up. Sign up for your ExA and get any fixed commitments sorted before signing up for the remaining experiments. For most labs in Groups A, C, D and G you will usually work in pairs (formed for each experiment), but for labs within Groups B, F and M you will usually work singly.
NB: the first lab period is on Friday 9 October, so sign up for at least one experiment before then. Lab handouts will be available and the booking sheets posted by 9am on Wednesday 7 October.
Marking
Completed reports must be submitted for marking within 2 weeks of carrying out the experiment (i.e. 15 term days inclusive of the day of the experiment), or by the Friday of week 1 at the start of the following term, if there are fewer than 15 days remaining in term.
The default latest time for handing in coursework on the deadline date is 4pm (unless you are specifically told otherwise in the coursework instructions for a given activity).
Marked reports should be returned within 15 term days (inclusive) of a hand-in date (or by the Friday of week 1 at the start of the following term, if there are fewer than 15 days remaining in term). Arrangements for marking may slightly vary from lab to lab. In most cases, reports are collected in, marked and returned with a feedback sheet. Group feedback sessions might also be offered in order to cover most common issues with the reports and provide students with an opportunity to discuss specific aspects of their report.
Plan ahead: any experiment that you are considering writing up as a FTR should be done early enough in the term for the marked lab report to be returned well before the FTR deadline at the end of term.
Mark scheme
Also see the Faculty Board notice on coursework and exam credit.
Extension Activity (1 per student)
- 16 hours activity with no more than 12 hours in the lab or field. [20 marks]
- Individual ExAs may break this mark total down into smaller units corresponding to different aspects of the chosen activity. Students who participate diligently in all stages of the exercise will gain the full 20 marks.
Module experiments or coursework (at least 8 per student)
- Up to 40 marks available from best 8 experiments or coursework [5 marks each]
- Marks on the scale 0–5; the marking scheme is given on the coversheet.
Penalties
- Lateness: 1 mark lost for each week or part week during full term that a report is late.
- No report, no marks.
- Failure to sign up for or attend a feedback session, where these are part of the lab arrangements: 1 mark penalty.
Full technical reports (2 per student, at least one of which must be in Michaelmas) [10 marks each]
- Marks on the scale 0–10. The marking scheme is given on the coversheet. Emphasis is placed on good presentation.
FTR deadlines
- Michaelmas term: 4pm, Friday 4 December
- Lent term: 4pm, Friday 11 March.
Penalties
- Penalty for lateness: 2 marks lost for each week or part week (term or vacation) that a report is late.
- No report, no marks.
Records of coursework marks
Some lab leaders display marks alongside the lab booking sheets, but it is important that you retain all your marked coursework, in case of later query, and for scrutiny by the external examiners. During the Easter term, a consolidated list of coursework credit marks will be displayed in the foyer of the Baker Building and there will be an opportunity to rectify any clerical errors that have arisen. Students will be emailed to check the list, and any queries must be made by Wednesday 25 May at the latest, by email to the relevant lab coordinator: Dr D Liang
Submission of coursework to external examiners
For examination purposes, all your Part IIA module coursework has to be available for inspection by the External Examiners. You must therefore ensure that you:
- collect all your work from wherever you handed it in to;
- hand in all your lab reports, essays and full technical reports (plus any coursework taken as part of a Part IIB module) to Lecture Room 11 between 10 am and noon on one of the following days: Thursday 2, Friday 3 or Monday 6 June.
If you will have a problem attending on the above dates or times, please contact the Teaching Office.
A submission form must be downloaded and signed, stating that all work submitted is your own. This should be placed on top of your bundle of coursework, which should then be tied securely with string or elastic bands.
The Chairman of IIA Examiners will be advised of any student whose coursework is not received.
Part II exam period, location & timetable
General information
Exams for Part II modules begin on the Monday of week 0 in the Easter term and end not later than the Wednesday of week 2. In 2016 the Part II exams will take place in the Department. MET IIA exams will take place at the IfM.
The exam timetable (http://www.admin.cam.ac.uk/students/studentregistry/exams/timetable) will be posted online and on the exams noticeboard in the Inglis corridor before the end of the Lent term.
Part IIA overview
Single modules (16 lectures) are each assessed by a 1.5-hour examination and double modules (32 lectures) by a 3-hour examination.
The total available credit for examinations is 600 marks (which is added to your coursework total, where the maximum available is 240). For further information see the Part IIA exam and coursework credit notice.
Part IIB overview
Each module is marked out of 60, and your total out of the 480 marks available is added to the marks for your project, for which 360 marks are available. For further information see the Part IIB exam and coursework credit notice.
All written examinations are of 1.5 hours’ duration, whether they count for 100% or 75% of the module credit.
Accreditation of the MEng
All students are encouraged to become student or affiliate members of one or more of the professional institutions.
Introduction
Most students reading Engineering at Cambridge will at some stage consider becoming professional engineers, and many will be firmly intending to do so. The engineering profession as a whole is currently supervised by the Engineering Council (UK). There are a number of chartered institutions or similar bodies, each concerned with a particular branch or type of engineering. Corporate membership of the appropriate institution is the professional qualification for that branch of engineering, and carries with it the title of Chartered Engineer.
A Cambridge Master of Engineering degree (MEng), with the appropriate choice of modules in Part II, provides exemption from part or all of the examination requirements at all the principal institutions (although a number of years of practical training and responsible experience are also required for corporate membership). See below for conditions of exemption for each institution.
The institutions welcome enquiries from engineering students and will supply, on request, information about careers and reading lists. Undergraduates may apply for student membership of any of the institutions listed below. Student membership is generally free and entitles the student to receive certain publications and to attend meetings organised in all parts of the country.
Accrediting bodies and CUED institutional liaison officers
All the four-year MEng courses offered by the Department of Engineering are accredited by one or more of the following institutions, depending on the engineering area studied. More details, including application forms, relating to membership of individual institutions can be obtained from the institutions' websites or from the appropriate liaison officer:
| Acronym | Institution | Liaison officer |
|---|---|---|
ICE |
||
IStructE |
||
IMechE |
||
IET |
||
RAeS |
||
InstMC |
||
CIHT |
||
IHE |
||
IPEM |
The MEng course is also recognised by the European Network for Accreditation of Engineering Education (ENAEE) as meeting the requirements of a “second cycle” European accredited engineering programme. In essence, this means that it meets the European standard for a Master’s degree.
Conditions of exemption
| Institutions | Conditions of exemption |
|---|---|
All Institutions: |
Students must complete two management modules (which includes those in Group E plus '4I1: strategic valuation') during the final two years of the MEng course. |
CIHT, IHE, ICE and IStructE: |
The MEng is accredited as fully satisfying the educational base for a Chartered Engineer (CEng) with the same requirement of two management modules being taken in Part II. For the purposes of accreditation, '4D16: construction and management' can be counted as one of the two management modules. |
RAeS, IMechE and IET: |
The MEng is accredited for all engineering areas. |
InstMC: |
The MEng is accredited for the instrumentation and control engineering area. Other engineering areas are also accredited provided that at least two of the following modules are taken:
|
IPEM: |
The MEng is accredited for students who take the bioengineering engineering area in both Part IIA and Part IIB. |
The Engineering Council
Graduates in Engineering, who are Corporate Members of one of the Engineering institutions above are invited to register with the Engineering Council to achieve Chartered Engineer status (CEng). This is usually acquired by application through the particular institution at the time of acceptance as a Corporate Member.
Students may like to become involved with the various activities of the Engineering Council which promote engineering among young people.
European-Accredited Engineering Programme
The Engineering Tripos (MEng) has been designated as a second cycle European-accredited engineering programme within the EUR-ACE system
Allowances
Overview
During the Michaelmas and Lent terms, Part IIA undergraduates submit a minimum of 8 reports/essays associated with modules, and 2 full technical reports (FTR), and complete an Extension Activity (ExA). During the Easter term, students undertake 2 projects. Students are expected to make all reasonable efforts to complete missed experiments, FTRs and ExAs at a later date, and should contact the member of staff in charge of the activity concerned as soon as possible.
An allowance of marks will not normally be made for more than the coursework for 4 modules and an ExA. Applications should be made at the time rearrangement proves not to be possible, and at latest by the end of the relevant term. Allowance forms can be downloaded here.
Part IIA projects
Students are expected to complete as much as possible of the work associated with their two projects, but the four week timetable imposes tight constraints. If there is any significant disruption to your project work (whether or not a report deadline is missed), you must notify your Tutor, project leader(s) and the Director of Undergraduate Education by email immediately, and the Tutor should submit a IIA project allowance form (NB: this is not the standard form used for all other allowances). If the deadline for any report is missed, a form must be submitted by the student’s Tutor within three working days of the report deadline.
Following first notification of disruption of a project due to illness, weekly consultations involving the Director of Undergraduate Education, project leader(s) and Director of Studies will be required until the project is back on track. This is in order to determine reasonable extensions to deadlines, or to agree a reduced or alternative submission of project work if appropriate.
Extensions for interim reports may be made until the final project deadline. Extensions for final reports are limited to a maximum of four days, and only in exceptional circumstances, since the Examiners must publish the final class lists two weeks after the submission date. An allowance of marks may be made only if a substantial part of the project work has been submitted, with the total mark being extrapolated in suitable proportion. Note that allowances are considered separately for each project, i.e. marks awarded for one project will not be used as a basis for awarding marks on the other project. Failure to submit any reports on a project will be treated in the same way as a missed examination: zero marks awarded.
Summary
Application deadline: Applications for coursework in Michaelmas and Lent Terms must be made on an Allowance form and received by one week after the end of the relevant Full Term. All other applications must be received by the Wednesday of the last week of Easter Full Term.
Activity |
Deadline extension |
Marks |
|---|---|---|
Lab experiments and management exercises |
Yes |
Yes, but not if it is possible to reschedule. Allowance will not normally be made for more than four experiments/exercises |
Full technical reports |
Yes |
Not normally |
Extension Activity |
Yes |
Yes, but not if student can join another group |
Easter term projects: |
|
|
Part IIA coursework contacts and hand-in locations
Overall Coursework Leader: Dr Dongfang Liang
Locations for handing in experiments and full technical reports
3A… |
Post box outside room BE2-03, 2nd floor Baker Building |
|
3B… |
EIETL, 2nd floor Inglis Building |
|
3C… |
Room BE3-39, 3rd floor Baker Building |
|
3D… |
|
Structures Lab, ground floor, Inglis Building |
3E… |
Teaching Office, room BEO-04, Office floor, Baker Building |
|
3F… |
EIETL, 2nd floor Inglis Building |
|
3G… |
EIETL, 2nd floor Inglis Building |
|
3M… |
EIETL, 2nd floor Inglis Building |
Related coversheets and forms
Distinguishing between cooperation & cheating
Coursework marks contribute significantly to your overall Tripos mark. Because this work is not carried out under examination conditions, the distinction between beneficial cooperation and deliberate cheating should be clearly understood.
The following information applies to all students. There is also supplementary information for Part IIB students.
Cooperation
It is perfectly acceptable to discuss continuously assessed work with other students, or with demonstrators or supervisors. Such discussions are beneficial and are to be encouraged. Effective use of such discussions can lead to higher marks, always provided that the student has made the main contribution to the work submitted and understands all of it.
Cheating
Cooperation can go too far, however, especially if one student is effectively carried by another or by the demonstrators. For example, while it may well be beneficial for students to discuss a problem in computing, it is unacceptable for two students to submit effectively identical programs. The named author must have made the main contribution to the work submitted and the report must be in his or her own words.
Electronic exchange of lab work is likewise acceptable up to a point. Results obtained jointly in the lab may have only been recorded by one student in a pair, due to time constraints, and it may be more practical to pass these on in electronic format (e.g. for a word-processed report). But analysis of the data, or production of graphs for the write-up, and all written sections of the report must be done individually, and may not be exchanged electronically.
Any deliberate attempt to pass off the work of others as being produced by the named author is cheating. Students suspected to have cheated will be reported to the Director of Undergraduate Education, and interviewed by an appropriate member of staff. For each coursework submission found to have been even partially copied, a mark penalty will be imposed and the student’s Director of Studies informed. The examiners may be informed and might take further action. Serious cheating will be referred to the University proctors.
Inclusive teaching
The Equality Act (2010) requires higher education institutions to take positive steps to make their education accessible to disabled students and to make ‘reasonable adjustments’ to provision to ensure that disabled students are not disadvantaged. Disabilities may include physical or mental impairments: the majority of these students have specific learning difficulty (SpLD) in the form of dyslexia. Cambridge University Disability Resource Centre has some standard recommendations for appropriate academic support for such students. Further provision may be required in particular cases.
In an organisation of our size and complexity, individual variations in provision are potentially disruptive. However, many of the suggested adjustments are just good educational practice, so represent things we should be doing anyway as a Department that takes pride in the excellence of its teaching. Indeed, we already follow many of the recommendations (e.g. provision of cribs). The approach we have adopted is therefore to aim to have inclusive standard procedures for all teaching activities. Students are expected to make use of available resources to suit their needs, and to contact staff themselves (e.g. lecturers, lab leaders) if additional material is required.
Link to list of IA lecturers, IB lecturers and lab leaders for IA and IB.
Contact details of part II lecturers can be found on the relevant syllabus pages.
Any enquiries should be addressed to the CUED Director of Undergraduate Education.
The following recommendations have been agreed by the Faculty Board (12 November 2012):
- Electronic versions of handouts should be made available on-line 24h in advance of lectures or other teaching sessions (e.g. labs). [This allows students who do have special requirements to produce their own customised hard copy if they wish: e.g. single-sided; large format; non-white background].
- Filled-in versions of notes should be made available on-line after lectures.
- Recording lectures (audio) is often recommended to students as a learning aid. They must sign an agreement to use the recording only for their own personal study, and acknowledging IP and copyright. The agreement form can be found here, and students are asked to provide the Teaching Office with a copy. Lecturers are asked to consent to their lectures being recorded under these conditions. A list of students who have completed agreement forms can be made available on request.
- In labs, instruction should be provided in both written and verbal form.
- Lecturers should remember to pay attention to ‘signposting’ e.g. statement a start of each lecture of what is being covered; tracking progression throughout lecture; summary of main teaching points at end.
- All staff should make particular effort to put new vocabulary into context and explain new concepts. It is helpful to provide some repetition.
Last updated on 01/10/2015 12:21